Cutting machine is the main equipment in the AAC production line,it is one of the necessary equipmens in the productive technology of aerated concrete building blocks equipment which produce more than 50,000 cubic metres every year.We use cutting machine to cut building blocks in the aerated concrete building blocks production line. The aerated concrete building blocks equipment designed by Huayi Machine can use ground turning over cutting machine to cut the building blocks.
Arated concrete building blocks equipment——cutting machine overview
Cutting machine is the main equipment in the AAC production line,it is the ensurance of increasing the annual output of AAC production line and one of the necessary equipments of producing more than 50,000 cubic metres every year.Our company is one with well-experince of aerated concrete building blocks equipment productive technology research and development.Our cutting machine can cut the cake in one step by turning over from six sides,and now has ran to two systems include many models of the latest generation aerated concrete cutting machine in China.
Arated concrete building blocks equipment——cutting machine working principle
Our cutting machine used in AAC production line include vertical cutting machine,cross cutting machine,work track and electric control frame.In the AAC building blocks cutting equipment technology,turning over sling turns the mould with 90 degree and demoulds it,the cake together with the side board of the mould are placed on the same cutting board.The vertical cutting device cuts the cake as it moves under the drive of its motor.After completing the side,it moves to the pause position.Cross cutting device moves to the middle of the cake stop there and then starts the cross cutting.At this time,the swing motor starts,cuts the cake from two sides,so as to cut the cake up and down vertically.When the crosscut reset,cross cutting equipment continue to move ahead to the pause position.cross and vertical cutting equipment move to the original position. By analogy, round and round, so as to achieve the cutting of cake.AAC building blocks equipment-cutting machine has great effect and significance in improving the AAC production line.
Arated concrete building blocks equipment——cutting machine working parameter
|NO.||Size||Size of the cake before cutting （mm）||Cutting cycle （about）||Capacity (m3/year)||Cutting precision （mm）||Power （kw）||Outer size of the machine （mm）|
|1||4M||4050×1240×650||6 lock/minute||Above 100,000||Six-side cutting ﹤±2||34||13800×4200×5600|
|2||4.2M||4250×1240×650||6 block/minute||Above 150,000||Six-side cutting ﹤±2||34||13800×4950×5870|
|3||6M||6050×1540×650||6 block/minute||Above 200,000||Six-side cutting ﹤±2||37||17500×4600×6000|
Advantages of Huayi Ground turning over cutting machine
1.Compact structure,easy operation,seldom need being repaired.
2.Complete the horizontal cutting and vertical cutting at one time.
3.Cutting each side of the cake ,its cutting precsion can meet the requirement of GB/T11969-1997.
4.It can be used to produce panel, its cutting precsion can meet the requirement of GB15762-1995
5.Recycling all the scraps,no secondary population occurs.
6.The cakes won’t adhere to each other.
7.Crosscut adopts screw transmission which solves the problem of desynchrony caused by hydraulic transmission.
8.Restrainer and safety interlock can prevent the accidents caused by improper operation.
9.We can replace the steel wire quickly,the steel wire is tensed penumatically and it can swing in two directions.
10. No defective products.
The process of producting aerated concrete block in the production line is to form cake after aerating ,as the size is big,cutting is needed to get the standard size ,the cutted cake is put on the hardening car,then put in autoclave for steam pressure curing,at last get the final production. In the whole procession, cutting machine is the key device .It is very impotant to the improving of quality.It is the essential equipment for 50,000 cubic of aerated concrete block annul production .